UWS 3.0 Detail Drawing and Photo Downloads

Detail	Description	View	Download	Photo
Ductbank Cross-section (Spacing)	Layout of spacing and components of a typical underground ductbank.			N/A
Building Entrance Detail	Example of a typical ductbank as it enters a building (profile view).			N/A
Manhole Entrance Detail	Profile of standard layout of a duct cell entrance into the side of a manhole.			N/A
Manhole Elevation	Profile view of typical telecom manhole.			N/A
Manhole Equipment Details	Views of cable racks and hooks used in manholes.			N/A
Manhole Cover	View of typical telecom manhole cover.			N/A
Site Restoration -- Brick Pavers	Cross section showing ductbanks and typical restoration of brick sidewalks.			N/A
Site Restoration -- Asphalt Pavement	Cross section showing ductbanks and typical restoration of asphalt streets and parking areas.			N/A
Site Restoration -- Grass Areas	Cross section showing ductbanks and typical restoration of grass areas.			N/A

Adobe PDF File AutoCAD file JPEG

Detail	Description	View	Download	Photo
Entrance Conduit End Fittings	Typical layout for locations where a building entrance ductbank enters the BDF.
Trapeze Mounted Wireway	Cross-section of typical support system for wireways to house station cables in corridors.	(Rev. 07/19/2010)
L Bracket Mounted Wireway	Cross-section of typical support system for wireways to house station cables in corridors (adjacent walls).	(Rev. 07/19/2010)
Riser Conduit Support (Horizontal)	Cross-section of typical support system for conduits to house riser cables between BDF and IDF.
Riser Conduit Support (Vertical)	Elevation view of typical floor to floor conduits housing riser cables.
Riser Conduit End Fittings	Typical layout for locations where conduits housing riser cables penetrate into a BDF/IDF.
Surface Mounted Outlet	Views of single outlet used on masonry or plaster walls.
Flush Mounted Outlet -- Retrofit	Views of single outlet used in existing gypboard and stud (hollow walls).	(Rev. 05/12/2011)
Flush Mounted Outlet -- New Construction	Views of single outlet used in new gypboard and stud (hollow) walls.			N/A
Surface Mounted Telephone Outlet	Views of single wall telephone outlet used on masonry or plaster walls.
Flush Mounted Telephone Outlet - Retrofit	Views of single wall telephone outlet used in existing gypboard and stud (hollow) walls.			N/A
Wiremold Surface Outlet	Views of single outlet used on masonry or plaster walls where aesthetics are a concern.

Adobe PDF File AutoCAD file JPEG

Racks	View	Download	Photo
24 outlet rack  (Rev. 11/09/2011)			N/A
48 outlet rack (Rev. 11/09/2011)			N/A
96 outlet rack (Rev. 11/09/2011)			N/A
144 outlet rack (Rev. 11/09/2011)			N/A
192 outlet rack (Rev. 11/09/2011)			N/A
BDF rack (Rev. 06/08/2012)			N/A
IDF rack (Rev. 11/09/2011)			N/A
Electronics rack (Rev. 11/09/2011)			N/A

Adobe PDF File AutoCAD file

Single Rack	View	Download	Photo
Single BDF Rack (Rev. 03/01/2012)			N/A
Single IDF Rack (Rev. 11/09/2011)			N/A

Adobe PDF File AutoCAD file

Cabinets	View	Download	Photo
BDF Surface Mount Cabinet (Rev. 03/01/2012)			N/A
IDF Surface Mount Cabinet (Rev. 03/01/2012)			N/A
Flush Mount Cabinet (Rev. 03/01/2012)			N/A

Adobe PDF File AutoCAD file

Fiber Termination / Labeling	View	Download	Photo
X-Connect Racks (Rev. 11/09/2011)			N/A
BDF Rack (Rev. 06/08/2012)			N/A
IDF Rack (Rev. 11/09/2011)			N/A
Single Rack BDF (Rev. 11/09/2011)			N/A
Single Rack IDF (Rev. 11/09/2011)			N/A
Surface Mount BDF Cabinet (Rev. 11/09/2011)			N/A
Surface Mount IDF Cabinet (Rev. 11/09/2011)			N/A

Adobe PDF File AutoCAD file

Schematic views of the various oulet types described by UWS 3.0.

Outlets	View	Download	Photo
Outlet Diagrams (Rev. 03/01/2012)			N/A

Adobe PDF File AutoCAD file

Installation	View	Download	Photo
Flush Cabinet Mounting (Rev. 11/17/2011)			N/A
Surface Cabinet Mounting (Rev. 11/21/2011)			N/A
Flextray Support Angle Bracket (Rev. 11/21/2011)			N/A
Entrance/Riser Cabling System Diagram (Rev. 03/01/2012)			N/A
Grounding Systems Riser Diagram (Rev. 03/01/2012)			N/A

Adobe PDF File AutoCAD file

These tables and details (assemblies) are to be verified by the designer to reflect field conditions, all applicable local codes, N.E.C., Fire Codes and most current version of the U.L. Directory. These tables and details (assemblies) are in no way intended to replace good, sound design judgment. They are shown for illustrative purposes only.

Click on the details listed below for options to view or download drawings.

Penetration Size (IN)	Material to be Penetrated	Fire Rating Hours	UL#	Description	View	Download	Photo
4x4 wireway 6x6 wireway 8x8 wireway	Gypsum board Wall or ceiling	1,2	W-L-7006	Penetration firestop for 12"x12" (or smaller), 24 gauge (or heavier), steel duct through gypsum board wall assembly.	(Rev. 01/08/2010		N/A
4x4 wireway 6x6 wireway 8x8 wireway	Concrete floor Concrete wall	2	C-AJ-7076	Penetration firestop for 30"x10" (or smaller), 24 gauge (or heavier), steel duct through a minimum 4-1/2" concrete floor.	(Rev. 10/14/2009)		N/A
4x4 wireway 6x6 wireway 8x8 wireway	Wood floor	1	F-C-7008	Penetration firestop for 30"x10" (or smaller), 24 gauge (or heavier), steel duct through a minimum 4-1/2" concrete floor.	(Rev. 01/07/2010)		N/A
1" conduit to 4" conduit	Gypsum board Wall or ceiling	1-4	W-L-1001	Penetration firestop for a max. 12" dia. steel pipe through a gypsum wallboard assembly.	(Rev. 06/15/2005)		N/A
1" conduit to 4" conduit	Concrete floor Concrete wall	2-4	C-AJ-1044	Penetration firestop 12" max. diameter metal pipe/conduit through a concrete floor/wall.	(Rev. 03/15/2007)		N/A
1" conduit to 4" conduit	Wood floor	1-2	F-C-1002	Penetration firestop for 4" EMT (or smaller) through 1 or 2 hour firerated wood joist floor-ceiling assembly.	(Rev. 09/03/2004)		N/A
Multiple conduit	Concrete floor Concrete Wall	3	C-AJ-1178	Penetration firestop for multiple pipe and conduit through 4-1/2" concrete floor.	(Rev. 12/09/2009)		N/A

Adobe PDF File AutoCAD file

These details (assemblies) are to be verified by the designer to reflect field conditions, all applicable local codes, N.E.C., Fire Codes and most current version of the U.L. Directory. These details (assemblies) are in no way intended to replace good, sound design judgment. They are shown for illustrative purposes only.

Assemblies	Details	View	Download
C-AJ-3152	Fireblocks installed around cable bundles within min. 4" diameter steel pipe/sleeve through a concrete floor/wall.	(Rev. 09/07/2007)
W-L-3079	Fireblocks installed around cable bundles within min. 4" diameter steel pipe/sleeve through gypsum board wall assembly.	(Rev. 06/13/1997)
C-AJ-0055	Fireblocks installed in empty minimum 4" diameter steel pipe/sleeve through concrete floor/wall.	(Rev. 09/11/1997)

Adobe PDF File AutoCAD file

1. Seal all penetrations of fire-rated construction, using the tested UL system applicable for the construction that was penetrated. This includes all floors, corridor walls, and other assemblies required to be sealed against fire/smoke spread.
2. If any exceptions to above table are found on-site during construction, contractor shall contact the NC State communication technologies office to determine appropriate firestop system to be used.
3. All details are reprinted from the online certifications directory with permission from UNDERWRITERS LABORATORIES, INC. All details are copyright 2003 UNDERWRITERS LABORATORIES, INC.
4. All wireway is to be rigidly supported to wall or floor assembly to eliminate movement in firestopped areas. When anchoring wireway to wall or floor, do not use sheet metal screws, but instead anchor with round head bolts on inside of wireway with nuts on outside of wireway, secure cover with screws on each side. Firestop according to UL details.

Details	Description	View	Download	Photo
Blue Light Telephone Assembly	Typical outdoor emergency telephone unit (free standing stanchion) used on the NC State campus. This is a generic drawing/spec only. Site specific details and notes are required for a complete design. The unit is manufactured by Gai-tronics.	(Rev. 03/28/2003)
Wall-mounted Blue Light Telephone Assembly	Wall-mounted emergency telephone unit used in parking decks on the NC State campus. This is a generic drawing/spec only. Site specific details and notes are required for a complete design. The unit is manufactured by Gai-tronics.	(Rev. 07/19/2010)
Security System Interface Outlet (SSI) - Type A	Interface box between campus security system devices and the building telecom infrastructure. Supports up to six (CAT6) or eight (CAT5) cables for network connections.	(Rev. 03/01/2012)		N/A
Security System Interface Outlet (SSI) - Type B	Interface box between campus security system devices and the building telecom infrastructure. Supports up to three (CAT6) or four (CAT5) cables for network connections.	(Rev. 03/01/12)		N/A

Adobe PDF File AutoCAD file JPEG